Saves time and labor when removing burst hose, relieving pressure on a line or changing fittings without damaging hose. Lightweight for easy transport.

• Simple to operate and releases quickly.
• For up to 1.5" single  jacket hose.
• Ship. wt. 2 lbs.

Saves time and labor when removing burst hose, relieving pressure on a line or changing fittings without damaging hose.

• Simple to operate and releases quickly.
• For up to 3" single or double jacket hose.
• Ship. wt. 24 lbs.

• Construction: zinc-coated 1” square welded tubular steel
• Designed to make easy work out of coiling 1” to 1 ½” hose under any condition
• Keeps hose clean, as compared to rolling up hose while it’s on the ground
• Attaches to virtually anything with a separate mounting bracket (included)
• Folds up to store in a 16” x 11” x 2” space

EXTENDED LEAD TIME SPECIAL ORDER - SHIPS DIRECT FROM FACTORY 

• Construction: zinc-coated 1” square welded tubular steel
• Designed to make easy work out of coiling 1.5" thru 3" hose
• Keeps hose clean, as compared to rolling up hose while it’s on the ground
• Attaches to virtually anything with a separate mounting bracket (included)
• Folds up to store in a 16” x 11” x 2” space

EXTENDED LEAD TIME SPECIAL ORDER - SHIPS DIRECT FROM FACTORY 

EXTENDED LEAD TIME SPECIAL ORDER - SHIPS DIRECT FROM FACTORY 

EXTENDED LEAD TIME SPECIAL ORDER - SHIPS DIRECT FROM FACTORY 

• Plated iron head, 7/8" plated steel handle
• For pentagon hydrant nuts up to 1¾" from point to flat
• Notched to fit 1¼" square hydrant nut
• Spanner for pin lug and sensible (rocker) lug couplings, 1½" thru 6"
• Overall length 18"

• Durable, light weight wrench for 1" - 3" fire hose line couplers, swivel hose fittings and anvil lug couplers
• Can also be used to open standard 70mm caps on foam concentrate containers.

• A durable, light weight wrench for large fire hose couplers (3"-7") and Storz fittings
• Can also be used to operate standard 1.5" and 1.25" pentagon fire hydrant nuts
• Opens standard 70mm caps on 5 gallon pails and threaded plugs on 55 gallon drums
• Air and Gas cock shut off
• Spark and corrosion proof and includes a quick snap belt clip.

Designed to loosen and tighten the caps found on standard (70 mm wide) 5 gallon foam pails and both the large and small bungs on 55 gallon drums.

• Made from incredibly tough, spark and corrosion proof glass-filled nylon in high visibility Yellow
• Mounting bracket available separately
• 10"  long
• 6.5 ounces

Mounting Bracket secures Drum & Pail or Super Spanner in place on a wall or in a cabinet, etc…

• Bracket can be fastened vertically, horizontally or at virtually any angle
• Once the Bracket is fastened in place, the Wrench can then be pulled out of and snapped back into the Bracket.

• Includes gas cock shutoff, pry bar and belt hook eye
• For 3/4" to 3" pin lug and rocker lug couplings
• Overall length 11-7/8"

EXTENDED LEAD TIME SPECIAL ORDER - SHIPS DIRECT FROM FACTORY 

• Designed for use on ¾" and 1" booster hose couplings
• Overall length is 7½"

EXTENDED LEAD TIME SPECIAL ORDER - SHIPS DIRECT FROM FACTORY 

• Simple to operate and releases quickly.
• For up to 1.5" single  jacket hose.
• Ship. wt. 2 lbs.
• High-Vis YELLOW powder coat

• 20-ft. green PVC suction hose
• 50-ft. blue PVC discharge hose
• Round steel hole strainer
• 2 Aluminum male adapters

• Works with NPT/NPSH connections
• 2" x 20' Green PVC suction
• 2" x 25' Blue PVC discharge
• 2" plated steel strainer

EXTENDED LEAD TIME SPECIAL ORDER - SHIPS DIRECT FROM FACTORY