HS Series Pump Parts-Primo Pumps & Fire Equipment

/ / /

HS SERIES - PARTS DIAGRAM

HS12-30HT1	12 gpm @ 30 psi	110V	3-stage
HS12-40HT1	12 gpm @ 40 psi	110V	4-stage
HS18-30HT1	18 gpm @ 30 psi	110V	3-stage
HS18-40HT2	18 gpm @ 40 psi	220V	4-stage
HS20-65HT2	20 gpm @ 65 psi	220V	4-stage
HS20-65TT2	20 gpm @ 65 psi	220V	4-stage

NOTES:
A. -0 and -1 model number suffix use figure A (i.e. HS18-30HT2-1)
B. -2 and -3 model number suffix use figure B (i.e. HS18-30HT2-3)

FIGURE A (-0 and-1 models)

1. Motor Assembly

2. Seal Kit

3. Back Plate

4. Impeller

5. Neck Ring

6. Diffuser Kit

7. Casing Screw

8. Casing

9. Priming Plug

10. Check valve

11. Foot

12. Spacer (3-stage only)

FIGURE B (-2 and -3 models)

1. Motor Assembly

2. Seal Kit

3. Back Plate

4. Impeller

5. Neck Ring

6. Diffuser Kit

7. Casing Screw

8. Casing

9. Priming Plug

10. Check valve

11. Foot

12. Spacer (3-stage only)

MOTOR ASSEMBLY (Standard models)

1. Fan Cover

2. Fan

3. Capacitor Cover

4. Screw

5. Capacitor

6. Motor Shell

7. Screw Set

8. Wave Washer

9. Bearing

10. Rotor

11. Bearing O-ring

12. Endshield, Drive

13. Motor Mounting Foot

14. Screw

15. Relay

MOTOR ASSEMBLY (HS20-65 only)

1. Nut

2. Bolt

3. Adaptor

4. Baffle

5. Fan

6. Endshield, Drive

7a. Bearing

7b. Bearing Retainer

7c. Screw

7d. Shaft Washer

7e. Bearing O-ring

8. Rotor

9. Capacitor Cover

10. Capacitor (w/wiring loom)

11. Stator

12. Endshield, Non-drive

13. Washers

14. Thermal Overload

15. Connector

16. Gasket

17. Cover

18. Screw

19. Lead Grommet

20. Motor Mounting Foot

PLEASE CALL FOR PRICING ON PARTS NOT LISTED BELOW

Item # Image Description Price

DP-TT70P-USA

Torrium II, 220V 60Hz

The latest controller for Davey HS and B Series pumps. Torrium®2 starts pump on pressure drop and stops pump on low flow. Provides constant, even water pressure with loss of prime protection. Improved slow leak detect circuit reduces cycling due to leaks or low flow devices such as water softeners and drip systems, but responds to normal water demand faster than original Torrium®. Replaces the Hydrascan and original Torrium® controllers.
24 month Manufacturer's Warranty.

DP-TT70Y-USA

Torrium II, 110V 60Hz

DP-TT45Y-USA

Torrium II, 110V 60Hz for LOW PSI RANGE APPLICATIONS

FOR USE ONLY ON LOW PSI SYSTEMS

DP-14078

Wrench, Torrium 2

DP-49376

1” FIP Braided SS Flex Discharge Hose<br><i>FOR NON-POTABLE WATER ONLY<i>

1” FIP Braided SS Flex Discharge Hose
FOR NON-POTABLE WATER ONLY

12" Long w/1" Female NPT fittings
Note: Does not include rubber gaskets sold separately.
FOR NON-POTABLE USE ONLY
DOES NO COMPLY WITH 2014 FEDERAL LEAD FREE GUIDELINES.

PP-HDS100FS12SS

1” FIP Stainless Steel LEAD FREE Flex Discharge Hose - 12” Long

12" Long Flexible Corrugated Body
1" FP x 1" FP
Gaskets Included
MEETS 2014 FEDERAL "LEAD-FREE" STANDARDS

PP-HDS100FS18SS

1” FIP Stainless Steel LEAD FREE Flex Discharge Hose - 18” Long

18" Long Flexible Corrugated Body
1" FP x 1" FP
Gaskets Included
MEETS 2014 FEDERAL "LEAD-FREE" STANDARDS

DP-49918

Gasket, 1" Booster Discharge Hose (ea)

For use with 1" braided stainless dischage hose #DP-49376.

PP-F100CPS80P

Fitting, 1" NPT Coupler SCH80 PVC

For coupling DP-24008 Supercell tank to Torrium 2

DP-32320-1SP

Davey Torrium Rotary Coupling Assy<br>HS/BT Series Pumps<br><i>LIMITED TO STOCK ON HAND</i>

Davey Torrium Rotary Coupling Assy
HS/BT Series Pumps
LIMITED TO STOCK ON HAND

For connecting original Torrium controllers to HS and BT series pump outlets.
NOTE: Not used with Torrium 2 controller.

DP-11392-10

Flow Cone, Hydrascan

DP-31907SP

Casing, HS Pump Front (NPT)

DPK-SL-HS

Davey HS Pump Seal Kit

PP-P80E-10ML

P-80 Emulsion Seal Lubricant for Pump Mechanical Seals (10ml tube)

P-80® Emulsion Temporary Rubber Lubricant is a biodegradable assembly aide that eases installation of tight-fitting rubber and plastic parts by reducing the force needed for insertion. Typical applications include installation of seals, o-rings, bushing, grommets, and grips. Use P-80 Emulsion for manual and automated applications. Only a thin film is needed for most applications. 10ml plastic tube with resealable cap.