DuraMAC™

MULTI-STAGE
PROGRAMMABLE
BOOSTER PUMPS

DuraMAC water pressure booster pumps are the first booster system of their kind.  Designed to be compatible for virtually all residential water pressure boosting applications they can be adjusted to operate based upon flow and/or pressure.

• Single speed, TEFC motor

• One dial programming

• Single status light for easy-to-use operation

• Electronics separated from waterway for safety

• Included pressure gauge and expansion tank

• Industry leading three year warranty.

Typical applications include:

• Household water supplies up to 20 gpm
• Irrigation

CLICK HERE TO VIEW DURAMAC PUMP SIZING CHART 

Unlike typical booster pumps, DuraMac booster pumps can operate in three different user selectable modes. The pump is programmed with one dial, and tells you if it is working properly via it's single status light.

The three programmable operating modes of the DuraMAC pump are as follows:

Flow Mode - Starts on water flow, Stops on low flow
Pump operates only when usage exceeds approximately one gallon per minute
 

 

Pressure Mode - Starts on pressure drop, Stops on low flow
Pump operates continuously while there is a demand for water
 

 

Conservation Mode - Starts on pressure drop, Stops on low flow
Pump operates only if system pressure drops below city supplied pressure and while there is a demand for water

NOTE: DO NOT EXCEED A TOTAL PUMP SYSTEM PRESSURE OF 100 PSI. The total pump pressure will be the inlet pressure + maximum boost pressure from the table above. Municipal water supplies can vary over a 24 hour period and in some applications a Pressure Regulator installed before the booster pump may be required to restrict the inlet pressure and prevent damage to the booster pump.