
DuraMAC™
COMMERCIAL
DUPLEX
MULTI-STAGE
PROGRAMMABLE
BOOSTER PUMP
SYSTEMS |
 |
Not all commercial boosting applications
require complicated boosting systems. The DuraMAC duplex booster pump system is
simple, versatile, sophisticated and reliable. Quite simply, it is
the world's most versatile boosting system for commercial or irrigation
use.
-
Easy set-up installation
-
Digital control with dual modes of operation
-
Durable stainless steel and no-lead brass
connections
-
TEFC single phase motor for quiet operation
|
|
Unlike typical booster pumps, DuraMac
Pressure Booster Systems can operate in three different user selectable
modes. The pump is
programmed with one dial, and tells you if it is working properly via it's single status light.
The three programmable operating modes of the DuraMAC
pump are as follows:
Flow Mode - Starts on water flow,
Stops on low flow
Pump operates only when usage exceeds approximately one gallon per
minute
Pressure Mode - Starts on pressure
drop, Stops on low flow
Pump operates continuously while there is a demand for water
Conservation Mode - Starts on pressure
drop, Stops on low flow
Pump operates only if system pressure drops below city supplied
pressure and while there is a demand for water
|
NOTE: DO NOT EXCEED A TOTAL PUMP
SYSTEM PRESSURE OF 100 PSI. The total
pump pressure will be the inlet pressure + maximum boost pressure from the
table above. Municipal water supplies can vary over a 24 hour period and
in some applications a Pressure Regulator installed before the booster
pump may be required to restrict the inlet pressure and prevent damage to
the booster pump.
KNOW YOUR BUILDING CODES:
The International Residential Code and most local building codes limits the
static (no flow) pressure to 80 psi for residential household use. In some
applications a Pressure Regulator installed after the booster pump may be
required to restrict the outlet pressure and prevent damage to household
appliances & plumbing.
The International Residential Code states "A
means for controlling increased pressure caused by thermal expansion shall be
installed where ... a backflow prevention device, check valve or other
device is installed on a water supply system using storage water heating
equipment." (2903.4) Since most Booster Pump Systems and Pressure Regulators
incorporate a check valve, installation of an expansion tank is highly
recommended even if not required by local code. DuraMAC pumps feature an
included expansion tank that will satisfy this requirement.
CALL 866-626-7867 FOR ASSISTANCE IN
SELECTING THE PROPER BOOSTER PUMP FOR YOUR APPLICATION. |
|